FUEL PUMP REASSEMBLY

PROCEDURE


  1. INSTALL FUEL PUMP

    Tech Tips

    Perform "Inspection After Repair" after replacing the fuel pump.

    Click here


    1. A01IHOMC02
      *1 O-ring
      *2 Fuel Pump Spacer

      Apply gasoline to a new O-ring. Then install the O-ring and fuel pump spacer to the fuel pump.

    2. Connect the fuel pump harness connector to install the fuel pump harness to the fuel pump.

    3. Engage the 5 claws to install the fuel pump to the fuel filter.

      Note


      • Make sure that the O-ring is not cut or pinched during the installation.

      • Engage the claws securely.

      • Do not remove the suction filter.

  2. INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY


    1. Engage the 2 claws to install the No. 1 fuel suction support to the fuel filter.

    2. Apply a light coat of gasoline to a new O-ring and install the O-ring to the jet pump.

    3. Install the fuel filter to the fuel sub-tank.

      Note

      Do not apply excessive force to the tube or No. 1 fuel suction support.

    4. A01IKVJC01
      *1 O-ring
      *a Notch

      Install the jet pump to the fuel sub-tank as shown in the illustration.

      Note

      Make sure that the O-ring is not cut or pinched during installation.

    5. Engage the clamp to connect the fuel pump filter hose to the fuel sub-tank.

    6. Engage the claw and install the fuel pump filter hose.

      Note

      Securely engage the claw.

    7. Engage the 2 claws.

      Note

      Securely engage the claw.

    8. Connect the fuel pump harness connector.

      Note

      Securely connect the fuel pump harness connector.

  3. INSTALL FUEL SENDER GAUGE ASSEMBLY

    Click here