ENGINE UNIT REMOVAL

PROCEDURE


  1. REMOVE KNOCK CONTROL SENSOR

  2. REMOVE SENSOR WIRE


    1. B006R80

      Disengage the 2 clamps and remove the bolt and sensor wire.

  3. REMOVE IGNITION COIL ASSEMBLY

  4. REMOVE VACUUM PUMP ASSEMBLY

  5. REMOVE NO. 3 WATER BY-PASS HOSE


    1. B006N26

      Slide the clip and remove the No. 3 water by-pass hose from the water inlet pipe.

  6. REMOVE NO. 2 WATER BY-PASS HOSE


    1. B006KO6

      Slide the clip and remove the No. 2 water by-pass hose from the water outlet.

  7. REMOVE VENTILATION HOSE


    1. B006QKT

      Slide the clip and remove the ventilation hose from the PCV valve (ventilation valve sub-assembly).

  8. REMOVE NO. 2 VENTILATION HOSE


    1. B006LNU

      Slide the clip and remove the No. 2 ventilation hose from the cylinder head cover sub-assembly.

  9. REMOVE NO. 1 COMPRESSOR MOUNTING BRACKET


    1. B006N2W

      Remove the 2 bolts and No. 1 compressor mounting bracket from the cylinder block sub-assembly.

  10. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY

  11. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY


    1. B006O3V

      Remove the 2 bolts and V-ribbed belt tensioner assembly.

  12. REMOVE WATER PUMP PULLEY

  13. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE


    1. Remove the engine oil level dipstick from the engine oil level dipstick guide.

    2. B006R9D

      Remove the bolt and engine oil level dipstick guide from the camshaft housing sub-assembly LH and oil pan sub-assembly.

    3. B006P5I

      Remove the engine oil level dipstick guide O-ring from the engine oil level dipstick guide.

  14. REMOVE WIRE HARNESS CLAMP BRACKET


    1. B006OZZ

      Remove the bolt and wire harness clamp bracket from the camshaft housing sub-assembly LH.

    2. B006M4X

      Remove the bolt and wire harness clamp bracket from the camshaft housing sub-assembly.

    3. B006LGP

      Remove the bolt and wire harness clamp bracket from the timing chain cover assembly.

    4. B006RG1

      Remove the bolt and wire harness clamp bracket from the oil pan sub-assembly.

    5. B006M35

      Remove the bolt and wire harness clamp bracket from the camshaft housing sub-assembly.

    6. B006ONW

      Remove the bolt and wire harness clamp bracket from the camshaft housing sub-assembly LH.