FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE

1. REMOVE V-RIBBED BELT

2. REMOVE CRANKSHAFT PULLEY

   
   
   1. 

      *a	Hold
      	Turn

      Using SST, hold the crankshaft pulley and loosen the crankshaft pulley set bolt. Further loosen the crankshaft pulley set bolt until 2 or 3 threads remain screwed into the crankshaft.

      SST

      09213-70011   ( 09213-70020 )

      09330-00021

   2. 

      *a	Hold
      	Turn

      Using SST, remove the crankshaft pulley set bolt and crankshaft pulley.

      SST

      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05021 )

3. REMOVE CRANKSHAFT TIMING GEAR KEY

   
   

   1. 

      Remove the crankshaft timing gear key from the crankshaft.

4. REMOVE TIMING CHAIN CASE OIL SEAL

   
   
   1. 

      *a	Protective Tape
      *b	Cut Position

      Using a knife, cut through the lip of the timing chain case oil seal.

   2. Using a screwdriver with its tip wrapped with protective tape, pry out the timing chain case oil seal.

      Note

      After removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.