ACCELERATOR PEDAL REMOVAL

PROCEDURE


  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


  2. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note


    • Avoid physical shock to the accelerator pedal sensor assembly.

    • Do not disassemble the accelerator pedal sensor assembly.

    • The accelerator pedal sensor assembly does not require lubrication.

    • Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.


    1. B006LHA

      Disconnect the accelerator pedal sensor assembly connector.

    2. Remove the 2 nuts and accelerator pedal sensor assembly.

      Note

      If the accelerator pedal sensor assembly has been struck or dropped, replace it.