INITIALIZATION
Note
Perform Registration (VIN registration or frame number registration) when replacing the ECM.
Before replacing the ECM, refer to Service Bulletin (for Immobiliser System).
Make sure to perform Reset Memory (AT initialization) when replacing the automatic transaxle assembly, engine assembly or ECM.
When the cable is disconnected from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected.
| System Name | See Procedure |
|---|---|
| Stop and Start System | |
| Panoramic View Monitor System | |
| Power Door Lock Control System | |
| Air Conditioning System | |
| Power Slide Door System | |
| Power Back Door System |
WHEN USING GTS
CAUTION:
Observe the following items for safety reasons:
Before using the GTS, read the instruction manual.
Prevent the GTS cable from being caught on the pedals, shift lever or steering wheel when driving with the GTS connected to the vehicle.
When driving the vehicle for testing purposes using the GTS, 2 persons are required. One is for driving the vehicle, and the other operates the GTS.
COOLING FAN SYSTEM
CAUTION:
The cooling fans may continue to operate after the engine switch is turned off. Be careful not to bring your hands or tools near the cooling fans while they are operating.
Tech Tips
The cooling fans may continue to operate for up to 13 minutes after the engine switch is turned off if the following conditions are met after driving under high load:
The engine coolant temperature is extremely high.
The outside air temperature is extremely high.