ALIGNMENT / HANDLING DIAGNOSIS SERVICE DATA

Vehicle Height (Unloaded Vehicle)

-	Front A - B	Rear C - D
for LHD	95 mm (3.74 in.)	36 mm (1.42 in.)
for RHD	105 mm (4.13 in.)	35 mm (1.38 in.)

Measurement Points:

A: Ground clearance of front wheel center

B: Ground clearance of front lower suspension arm bushing set bolt center

C: Ground clearance of rear wheel center

D: Ground clearance of rear No. 2 suspension arm set bolt center

Camber (Unloaded Vehicle)

-	-	Camber Inclination	Right-left Difference
Front	for LHD	-0°10' +/- 0°45' (-0.17° +/- 0.75°)	0°45' (0.75°) or less
Front	for RHD	-0°15' +/- 0°45' (-0.25° +/- 0.75°)	0°45' (0.75°) or less
Rear	-	-0°10' +/- 0°45' (-0.17° +/- 0.75°)	0°45' (0.75°) or less

Caster (Unloaded Vehicle)

-	Caster Inclination	Right-left Difference
for LHD	5°40' +/- 0°45' (5.67° +/- 0.75°)	0°45' (0.75°) or less
for RHD	5°35' +/- 0°45' (5.58° +/- 0.75°)	0°45' (0.75°) or less

Steering Axis Inclination (Unloaded Vehicle)

-	Steering Axis Inclination Reference
for LHD	11°25' (11.42°)
for RHD	11°35' (11.58°)

Toe-in (Unloaded Vehicle)

-	Specified Condition
Front	C + D: 0°05' +/- 0°10' (0.08° +/- 0.17°)
Front	B - A: 1.0 +/- 2.0 mm (0.0394 +/- 0.0787 in.)
Rear	C + D: 0°10' +/- 0°10' (0.17° +/- 0.17°)
Rear	B - A: 2.0 +/- 2.0 mm (0.0787 +/- 0.0787 in.)

Wheel Turning Angle (Unloaded Vehicle)

-	Inside Wheel	Outside Wheel
for LHD	39°16' +/- 2°00' (39.27° +/- 2°)	32°43' (32.72°)
for RHD	39°08' +/- 2°00' (39.13° +/- 2°)	32°30' (32.50°)