LIGHTING (EXT) SERVICE DATA

HEADLIGHT DIMMER SWITCH (for Headlight Dimmer Switch LH Side Type)
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected G113-18(T) - G113-15(EL) Light control switch off 10 kΩ or higher
G113-20(A) - G113-15(EL)
G113-19(H) - G113-15(EL)
G113-18(T) - G113-15(EL) Light control switch tail position Below 1 Ω
G113-19(H) - G113-15(EL) Light control switch head position Below 1 Ω
G113-18(T) - G113-15(EL)
G113-20(A) - G113-15(EL) Light control switch AUTO position Below 1 Ω
G113-17(HF) - G113-15(EL) Headlight dimmer switch flash position Below 1 Ω
G113-14(HU) - G113-15(EL)
G113-14(HU) - G113-15(EL) Headlight dimmer switch high position Below 1 Ω
G113-12(TR) - G113-15(EL) Turn signal switch neutral position 10 kΩ or higher
G113-11(TL) - G113-15(EL)
G113-13(CR) - G113-15(EL)
G113-12(TR) - G113-15(EL)

Turn signal switch right turn position

(self cancel condition)

 Below 1 Ω
G113-12(TR) - G113-15(EL)

Turn signal switch right turn position

(cancel ratchet operation condition)

 Below 1 Ω
G113-12(TR) - G113-13(CR)
G113-13(CR) - G113-15(EL)
G113-11(TL) - G113-15(EL)

Turn signal switch left turn position

(self cancel condition)

 Below 1 Ω
G113-11(TL) - G113-15(EL)

Turn signal switch in left turn position

(cancel ratchet operation condition)

 Below 1 Ω
G113-11(TL) - G113-13(CR)
G113-13(CR) - G113-15(EL)
G113-9(BFG) - G113-8(LFG) Front fog light switch off 10 kΩ or higher
G113-9(BFG) - G113-8(LFG) Front fog light switch on Below 1 Ω
G113-9(BFG) - G113-8(LFG) Rear fog light switch off 10 kΩ or higher
G113-7(B) - G113-8(LFG)
G113-9(BFG) - G113-8(LFG) Rear fog light switch on Below 1 Ω
G113-7(B) - G113-8(LFG)

Tech Tips


  • The self cancel condition indicates when the turn signal switch returns to the neutral position when releasing your hand from the switch (switch is operated within 7°).

  • The cancel ratchet operation condition indicates the condition when the turn signal switch does not return to the neutral position even when releasing your hand (switch operation is 12°).

HEADLIGHT DIMMER SWITCH (for Headlight Dimmer Switch RH Side Type)
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected G2-13 (T) - G2-16 (EL) Light control switch off 10 kΩ or higher
G2-11 (A) - G2-16 (EL)
G2-12 (H) - G2-16 (EL)
G2-13 (T) - G2-16 (EL) Light control switch tail position Below 1 Ω
G2-12 (H) - G2-16 (EL) Light control switch head position Below 1 Ω
G2-13 (T) - G2-16 (EL)
G2-11 (A) - G2-16 (EL) Light control switch AUTO position Below 1 Ω
G2-14 (HF) - G2-16 (EL) Headlight dimmer switch flash position Below 1 Ω
G2-17 (HU) - G2-16 (EL)
G2-17 (HU) - G2-16 (EL) Headlight dimmer switch high position Below 1 Ω
G2-20 (TR) - G2-16 (EL) Turn signal switch neutral position 10 kΩ or higher
G2-19 (TL) - G2-16 (EL)
G2-18(CR) - G2-16(EL)
G2-20 (TR) - G2-16 (EL)

Turn signal switch right turn position

(self cancel condition)

 Below 1 Ω
G2-20 (TR) - G2-16 (EL)

Turn signal switch right turn position

(cancel ratchet operation condition)

 Below 1 Ω
G2-20 (TR) - G2-18 (CR)
G2-18 (CR) - G2-16 (EL)
G2-19 (TL) - G2-16 (EL)

Turn signal switch left turn position

(self cancel condition)

 Below 1 Ω
G2-19 (TL) - G2-16 (EL)

Turn signal switch in left turn position

(cancel ratchet operation condition)

 Below 1 Ω
G2-19 (TL) - G2-18 (CR)
G2-18 (CR) - G2-16 (EL)
G2-2 (BFG) - G2-3 (LFG) Front fog light switch off 10 kΩ or higher
G2-2 (BFG) - G2-3 (LFG) Front fog light switch on Below 1 Ω

Tech Tips


  • The self cancel condition indicates when the turn signal switch returns to the neutral position when releasing your hand from the switch (switch is operated within 7°).

  • The cancel ratchet operation condition indicates the condition when the turn signal switch does not return to the neutral position even when releasing your hand (switch operation is 12°).

HAZARD WARNING SWITCH
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected H9-4 - H9-1 Hazard warning signal switch off 10 kΩ or higher
Hazard warning signal switch on Below 1 Ω
AUTO HIGH BEAM SWITCH
Connector Condition Tester Connection Condition Specified Condition
Component with harness connected G55-4 - G55-1 Automatic high beam main switch off 10 kΩ or higher
Automatic high beam main switch on Below 1 Ω
STOP LIGHT SWITCH
Connector Condition Tester Connection Switch Condition Specified Condition
Component with harness connected A1- 1 (OUT) - A1-2 (GND) Brake pedal not depressed 0 to 1.5 V
A1-1 (OUT) - A1-2 (GND) Brake pedal depressed 7.5 to 14 V
A1-3 (L) - A1-2 (GND) Brake pedal not depressed 7.5 to 14 V
A1-3 (L) - A1-2 (GND) Brake pedal depressed 0 to 1.5 V
A1-4 (ACC) - A1-2 (GND) IG ON 11 to 14 V
A1-5 (L) - A1-2 (GND) Brake pedal not depressed 7.5 to 14 V
A1-5 (L) - A1-2 (GND) Brake pedal depressed 0 to 1.5 V
AUTOMATIC LIGHT CONTROL SENSOR
Connector Condition Tester Connection Condition Specified Condition
Component with harness connected H1-4 (CLTS) - H1-2 (CLTE) Power switch on (IG), light control switch in AUTO position Correct waveform is as shown
A01IKM3N01

Tech Tips

The communication waveform changes according to the surrounding brightness.

HEIGHT CONTROL SENSOR
Connector Condition Tester Connection Condition Specified Condition
Component without harness connected L4-1 (SHG) - L4-2 (SHRR) +35.7° (High) Approx. 4.5 V
0° (Standard position) Approx. 2.25 V
-30.7° (Low) Approx. 0.5 V
RELAY (H-LP LH Relay)
Connector Condition Tester Connection Condition Specified Condition
- 3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω
RELAY (H-LP RH Relay)
Connector Condition Tester Connection Condition Specified Condition
- 3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω