RELAY INSPECTION

PROCEDURE


  1. INSTALL RELAY BLOCK ASSEMBLY


    1. A01HGCGC02

      Preparations for inspection


      1. Connect the positive battery terminal to terminal 2 of the fuel lid opener relay and the negative battery terminal to terminal 1.

    2. Measure resistance


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        4 - 3 Battery not connected Below 1 Ω
        Battery connected 10 kΩ or higher
        5 - 3 Battery not connected
        Battery connected Below 1 Ω