BACK DOOR CLOSER ECU INSTALLATION

PROCEDURE

1. INSTALL MULTIPLEX NETWORK DOOR ECU

   
   

   1. 

      	Bolt
      	Connector

      Connect the 2 connectors.

   2. Attach the guide and clip to install the multiplex network door ECU.

      Note

      Be careful not to drop the multiplex network door ECU as it may become damaged.

   3. Install the 2 bolts in the order shown in the illustration.

      Torque:

      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

   Click here

3. INSTALL BACK DOOR LOCK COVER

   Click here

4. INSTALL PULL HANDLE

   Click here

5. INSTALL BACK DOOR TRIM BASE

   Click here

6. INSTALL BACK DOOR SIDE GARNISH LH

   Click here

7. INSTALL BACK DOOR SIDE GARNISH RH

   Click here

8. INSTALL BACK DOOR CENTER GARNISH

   Click here

9. INSPECT POWER BACK DOOR SYSTEM

   Click here