BACK DOOR OPENER SWITCH REMOVAL

PROCEDURE

1. PRECAUTION

   
   

   1. w/ Parking Assist Monitor System:

      Click here

   2. w/ Panoramic View Monitor System:

      Click here

2. REMOVE BACK DOOR CENTER GARNISH

   Click here

3. REMOVE BACK DOOR SIDE GARNISH LH

   Click here

4. REMOVE BACK DOOR SIDE GARNISH RH

   Tech Tips

   Use the same procedure described for the LH side.

5. REMOVE BACK DOOR TRIM BASE (w/ Power Back Door)

   Click here

6. REMOVE PULL HANDLE (w/ Power Back Door)

   Click here

7. REMOVE BACK DOOR FINISH COVER LH (w/o Power Back Door)

   Click here

8. REMOVE BACK DOOR FINISH COVER RH (w/o Power Back Door)

   Click here

9. REMOVE BACK DOOR LOCK COVER (w/ Power Back Door)

   Click here

10. REMOVE BACK DOOR LOCK COVER (w/o Power Back Door)

    Click here

11. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

    Click here

12. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

13. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY

    
    

    1. 

       Disconnect the connector and remove the back door opener switch assembly.