HOOD LOCK CONTROL CABLE ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE RADIATOR SUPPORT OPENING COVER

    Click here

  2. REMOVE HOOD LOCK CONTROL CABLE COVER (for RHD, w/Cover)


    1. B0057IE

      Remove the screw.

    2. Detach the claw and remove the hood lock control cable cover.

  3. REMOVE HOOD LOCK ASSEMBLY

    Click here

  4. REMOVE CENTER HOOD CUSHION

    B0059BQ

    1. Detach the 2 claws and remove the center hood cushion.

  5. REMOVE HOOD TO FRONT FENDER SEAL LH


    1. B00572R

      Detach the clip and remove the hood to front fender seal LH.

  6. REMOVE HOOD TO FRONT FENDER SEAL RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. REMOVE DOOR SCUFF PLATE ASSEMBLY LH

    Click here

  8. REMOVE DOOR SCUFF PLATE ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. REMOVE COWL SIDE TRIM BOARD LH

    Click here

  10. REMOVE COWL SIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  12. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. B005BHG

      Detach the 3 claws and disconnect the hood lock control lever sub-assembly.

    2. B005AOI

      Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.

  13. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)


    1. B0057LHC17
      *1 String

      Tie a string to the end of the hood lock control cable assembly as shown in the illustration.

      Tech Tips

      Use a length of string long enough to pass through the engine compartment.

    2. Detach each clamp, and then pull out the hood lock control cable assembly from the vehicle body.

      B005882C01
      *1 Hood Lock Control Cable Assembly *2 Clamp

    3. Untie the string from the hood lock control cable assembly.

  14. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)


    1. B0057LHC19
      *1 String

      Tie a string to the end of the hood lock control cable assembly as shown in the illustration.

      Tech Tips

      Use a length of string long enough to pass through the engine compartment.

    2. Detach each clamp, and then pull out the hood lock control cable assembly from the vehicle body.

      B0057WTC02
      *1 Hood Lock Control Cable Assembly *2 Clamp

    3. Untie the string from the hood lock control cable assembly.