HOOD REASSEMBLY

PROCEDURE

1. INSTALL ENGINE HOOD LOCK STRIKER ASSEMBLY

   
   

   1. Attach the guide.

   2. Install the engine hood lock striker assembly with the 2 bolts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

2. INSTALL RADIATOR SUPPORT OPENING COVER

   Click here

3. INSTALL HOOD AUXILIARY CATCH HOOK ASSEMBLY

   
   

   1. Attach the guide.

   2. Install the hood auxiliary catch hook assembly with the 2 bolts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

4. CONNECT WASHER HOSE ASSEMBLY

   
   

   1. Attach the 4 clamps to connect the washer hose assembly.

5. INSTALL WASHER NOZZLE SUB-ASSEMBLY

   Click here

6. INSPECT WASHER NOZZLE SUB-ASSEMBLY

   Click here

7. ADJUST WASHER NOZZLE SUB-ASSEMBLY

   Click here

8. INSTALL HOOD TO FRONT FENDER SEAL LH

   
   

   1. Attach the 2 claws to install the hood to front fender seal LH.

9. INSTALL HOOD TO FRONT FENDER SEAL RH

   Tech Tips

   Use the same procedure as for the LH side.

10. INSTALL HOOD INSULATOR

    
    

    1. Attach the 2 guides.

    2. Install the hood insulator with the 7 clips.