WINDSHIELD DEICER SYSTEM TERMINALS OF ECU


  1. CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY

    B0059OME13

    1. Disconnect the I50 air conditioning amplifier assembly connector.

    2. Measure the voltage and resistance according to the value(s) in the table below.

      Tester Connection Wiring Color Terminal Description Condition Specified Condition
      I50-1 (IG+) - Body ground SB - Body ground Power source (IG) Engine switch on (IG) 11 to 14 V
      Engine switch off Below 1 V
      I50-21 (B) - Body ground GR - Body ground Battery power supply Always 11 to 14 V
      I50-14 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω

    3. Reconnect the I50 air conditioning amplifier assembly connector.

    4. Measure the voltage according to the value(s) in the table below.

      Tester Connection Wiring Color Terminal Description Condition Specified Condition
      I50-39 (FDEF) - Body ground L - Body ground Windshield Deicer signal Engine switch on (IG), windshield deicer switch off 11 to 14 V
      Engine switch on (IG), windshield deicer switch on Below 2.2 V