LOWER INSTRUMENT PANEL INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

PROCEDURE


  1. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    1. for LHD:


      1. Cut off both ends at the positions shown in the illustration (runner) (when installing new part).

        B0056ZIC01
        *1 Runner - -
        *a Cut-off Line - -

      2. Attach the 2 guides and claw to connect the hood lock control lever sub-assembly to install the lower instrument panel sub-assembly.

      3. Attach the 2 claws to connect the DLC3.

      4. Connect the connector and room temperature sensor.

      5. Install the screw <E>.

      6. Install the 9 bolts <F> or <G>.

      7. Install the 2 bolts <D>.

      8. Attach the clamps.

        B00576AC02
        *1 Guide *2 Hood Lock Control Lever Sub-assembly
        *3 DLC3 *4 Connector
        *5 Room Temperature Sensor *6 Screw <E>
        *7 Bolt <F> or <G> *8 Bolt <D>

    2. for RHD:


      1. Cut off both ends at the positions shown in the illustration (runner) (when installing new part).

        B005ALSC02
        *1 Runner - -
        *a Cut-off Line - -

      2. Attach the 2 guides and claw to connect the hood lock control lever sub-assembly to install the lower instrument panel sub-assembly.

      3. Attach the 2 claws to connect the DLC3.

      4. Connect the connector and room temperature sensor.

      5. Install the screw <E>.

      6. Install the 9 bolts <F> or <G>.

      7. Install the 2 bolts <D>.

      8. Attach the clamps.

        B0058UQC02
        *1 Guide *2 Hood Lock Control Lever Sub-assembly
        *3 DLC3 *4 Connector
        *5 Room Temperature Sensor *6 Screw <E>
        *7 Bolt <F> or <G> *8 Bolt <D>

  2. INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY


    1. Attach the claw to install the glove compartment door stopper sub-assembly.

  3. INSTALL INSTRUMENT PANEL HOLE COVER (for RHD)


    1. B00598MC01
      *1 Screw <A> or <B>

      Install the instrument panel hole cover with the 2 screws <A> or <B>.

  4. INSTALL NO. 2 INSTRUMENT PANEL HOLE COVER (for RHD)


    1. B0057VS

      Attach the 2 guides and 2 claws to install the No. 2 instrument panel hole cover.

  5. INSTALL NO. 1 SPEAKER ASSEMBLY WITH BOX

    Click here

  6. INSTALL TELEMATICS TRANSCEIVER

    Click here

  7. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

  8. INSTALL COWL SIDE TRIM BOARD LH

    Click here

  9. INSTALL DOOR SCUFF PLATE ASSEMBLY LH

    Click here

  10. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. B0058B3

      for LHD:


      1. Connect the connector.

      2. Attach the guide and 3 claws to install the No. 2 instrument panel under cover sub-assembly.

    2. B00578T

      for RHD:


      1. Connect the connector.

      2. Attach the guide and 2 claws to install the No. 2 instrument panel under cover sub-assembly.

  11. INSTALL RADIO RECEIVER ASSEMBLY

    Click here

  12. INSTALL CENTER HEATER TO REGISTER DUCT


    1. B005BCRC01
      *1 Clip <C>

      Attach the 2 claws to install the center heater to register duct.

    2. Install the 2 clips <C>.

  13. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. B0058QM

      Attach the 4 clips to install the center instrument panel register assembly.

  14. INSTALL AIR CONDITIONING CONTROL ASSEMBLY


    1. B005754

      Connect the connectors.

    2. Attach the 6 clips to install the air conditioning control assembly.

  15. INSTALL CONSOLE BOX ASSEMBLY

    Click here

  16. INSTALL CONSOLE BOX CARPET

    Click here

  17. INSTALL CONSOLE BOX POCKET (w/o Wireless Charger)

    Click here

  18. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY

    Click here

  19. INSTALL INNER NO. 1 INSTRUMENT PANEL BRACE COVER LH

    Click here

  20. INSTALL INNER NO. 1 INSTRUMENT PANEL BRACE COVER RH

    Click here

  21. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    Click here

  22. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  23. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  24. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY

    Click here

  25. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY

    Click here

  26. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

    Click here

  27. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

    Click here

  28. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

    Click here

  29. INSTALL FRONT PILLAR GARNISH ASSEMBLY LH

    Click here

  30. INSTALL FRONT PILLAR GARNISH ASSEMBLY RH

    Click here

  31. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH


    1. Connect the front door opening trim weatherstrip LH.

  32. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH


    1. Connect the front door opening trim weatherstrip RH.

  33. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  34. INSTALL MULTI-DISPLAY ASSEMBLY

    Click here

  35. INSTALL COMBINATION METER ASSEMBLY

    Click here

  36. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  37. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    Click here

  38. INSTALL NO. 2 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  39. INSTALL INSTRUMENT SIDE PANEL RH

    Click here

  40. INSTALL NO. 1 SWITCH HOLE BASE

    Click here

  41. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  42. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  43. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  44. INSTALL INSTRUMENT SIDE PANEL LH

    Click here

  45. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH

    Click here

  46. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH

    Click here

  47. INSTALL UPPER REAR CONSOLE PANEL

    Click here

  48. INSTALL CONSOLE ARMREST ASSEMBLY

    Click here

  49. INSTALL COWL SIDE TRIM BOARD RH

    Click here

  50. INSTALL DOOR SCUFF PLATE ASSEMBLY RH

    Click here

  51. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY

    Click here

  52. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  53. ENABLE AUTOAWAY/RETURN FUNCTION (for Power Tilt and Power Telescopic Steering Column)


    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter.

      Click here

  54. CHECK SRS WARNING LIGHT

    Click here