CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
PROCEDURE
REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR COVER (for Type B)
Detach the 2 claws, 2 guides and remove the child restraint seat tether anchor cover.
REMOVE VANITY LIGHT ASSEMBLY
Tech Tips
Use the same procedure for both vanity light assemblies.
| *1 | Bulb Holder |
| *a | Claw A |
| *b | Claw B |
Detach the 2 claws A and separate the bulb holder from the vanity light assembly as shown in the illustration.
Detach the claw B and remove the vanity light assembly.
REMOVE TELEPHONE MICROPHONE ASSEMBLY
REMOVE NO. 1 MICROPHONE CASE
Detach the claw.
Detach the guide and remove the No. 1 microphone case.
REMOVE NO. 1 ROOF SILENCER PAD (for Normal Roof)
Remove the No. 1 roof silencer pad.
REMOVE NO. 2 ROOF SILENCER PAD (for Normal Roof)
for Type A:
Remove the 2 No. 2 roof silencer pads.
for Type B:
Remove the 2 No. 2 roof silencer pads.
REMOVE NO. 3 ROOF SILENCER PAD (for Normal Roof)
Remove the 2 No. 3 roof silencer pads.
REMOVE REAR ROOF SILENCER PAD (for Normal Roof)
Remove the rear roof silencer pad.
REMOVE REAR ROOF SILENCER PAD (for Sliding Roof)
Remove the rear roof silencer pad.
REMOVE NO. 4 ROOF SILENCER PAD (for Normal Roof)
Remove the No. 4 roof silencer pad.
REMOVE ROOF HEADLINING PAD (for Normal Roof)
Remove the 2 roof headlining pads.
REMOVE ROOF HEADLINING PAD (for Sliding Roof)
Remove the 2 roof headlining pads.
REMOVE ROOF HEADLINING PAD (for Glass Roof)
Remove the 2 roof headlining pads.
REMOVE FRONT ROOF HEADLINING SIDE PAD (for Normal Roof)
Remove the 2 front roof headlining side pads.
REMOVE ROOF HEADLINING END PAD (for Normal Roof)
Remove the 2 roof headlining end pads.
REMOVE ROOF HEADLINING END PAD (for Sliding Roof)
Remove the 2 roof headlining end pads.
REMOVE ROOF HEADLINING END PAD (for Glass Roof)
Remove the 2 roof headlining end pads.
REMOVE NO. 2 ROOF HEADLINING SUPPORT (for Normal Roof, for Type B)
Remove the No. 2 roof headlining support.
REMOVE ROOF HEADLINING SUPPORT (for Normal Roof, for Type B)
Remove the No. 2 roof headlining support.
REMOVE NO. 1 ROOF WIRE (for Normal Roof)
for LHD:
Turn the visor connectors approximately 90° counterclockwise and remove them from the roof headlining.
Remove each piece of tape and the No. 1 roof wire from the roof headlining.
| *A | w/o Lane Departure Alert System | *B | w/ Lane Departure Alert System |
| *C | w/ Rain Sensor | - | - |
| *1 | No. 1 Roof Wire | - | - |
|
Tape | - | - |
Remove the butyl tape remaining on the roof headlining.
for RHD:
Turn the visor connectors approximately 90° counterclockwise and remove them from the roof headlining.
Remove each piece of tape and the No. 1 roof wire from the roof headlining.
| *A | w/o Lane Departure Alert System | *B | w/ Lane Departure Alert System |
| *C | w/ Rain Sensor | - | - |
| *1 | No. 1 Roof Wire | - | - |
|
Tape | - | - |
Remove the butyl tape remaining on the roof headlining.
REMOVE NO. 1 ROOF WIRE (for Sliding Roof)
for LHD:
Turn the visor connectors approximately 90° counterclockwise and remove them from the roof headlining.
Remove each piece of tape and the No. 1 roof wire from the roof headlining.
| *A | w/o Lane Departure Alert System | *B | w/ Lane Departure Alert System |
| *C | w/ Rain Sensor | - | - |
| *1 | No. 1 Roof Wire | - | - |
|
Tape | - | - |
Remove the butyl tape remaining on the roof headlining.
for RHD:
Turn the visor connectors approximately 90° counterclockwise and remove them from the roof headlining.
Remove each piece of tape and the No. 1 roof wire from the roof headlining.
| *A | w/o Lane Departure Alert System | *B | w/ Lane Departure Alert System |
| *C | w/ Rain Sensor | - | - |
| *1 | No. 1 Roof Wire | - | - |
|
Tape | - | - |
Remove the butyl tape remaining on the roof headlining.
REMOVE NO. 1 ROOF WIRE (for Glass Roof)
for LHD:
Turn the visor connectors approximately 90° counterclockwise and remove them from the roof headlining.
Remove each piece of tape and the No. 1 roof wire from the roof headlining.
| *A | w/o Lane Departure Alert System | *B | w/ Lane Departure Alert System |
| *C | w/ Rain Sensor | - | - |
| *1 | No. 1 Roof Wire | - | - |
|
Tape | - | - |
Remove the butyl tape remaining on the roof headlining.
for RHD:
Turn the visor connectors approximately 90° counterclockwise and remove them from the roof headlining.
Remove each piece of tape and the No. 1 roof wire from the roof headlining.
| *A | w/o Lane Departure Alert System | *B | w/ Lane Departure Alert System |
| *C | w/ Rain Sensor | - | - |
| *1 | No. 1 Roof Wire | - | - |
|
Tape | - | - |
Remove the butyl tape remaining on the roof headlining.
REMOVE NO. 4 ROOF HEADLINING SUPPORT (for Normal Roof, for Type B)
Remove the No. 4 roof headlining support.
REMOVE NO. 3 ROOF HEADLINING SUPPORT (for Normal Roof, for Type B)
Remove the No. 3 roof headlining support.
REMOVE NO. 4 ROOF HEADLINING SUPPORT (for Sliding Roof, for Type B)
Remove the No. 4 roof headlining support.
REMOVE NO. 3 ROOF HEADLINING SUPPORT (for Sliding Roof, for Type B)
Remove the No. 3 roof headlining support.
REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY