ECO SWITCH INSPECTION

PROCEDURE


  1. INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY (ECO MODE SWITCH)


    1. B0057ULC25
      *a

      Component without harness connected

      (Integration Control and Panel Assembly (Eco Mode Switch))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      9 (ECU) - 1 (GND) Integration control and panel assembly being turned and held at ECO position Below 10 Ω
      Integration control and panel assembly not turned 10 kΩ or higher

      If the result is not as specified, replace the integration control and panel assembly (eco mode switch).