COMPRESSOR(for 8AR-FTS) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM


    1. for HFC-134a(R134a):

      Click here

    2. for HFO-1234yf(R1234yf):

      Click here

  2. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  3. REMOVE REAR ENGINE UNDER COVER RH

    Click here

  4. REMOVE REAR ENGINE UNDER COVER LH

    Click here

  5. REMOVE FAN AND GENERATOR V BELT

    Click here

  6. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT LH

    Click here

  7. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH

    Click here

  8. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

    Click here

  9. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY


    1. A01HH9Y

      Remove the bolt and disconnect the discharge hose sub-assembly.

    2. Remove the O-ring from the discharge hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  10. DISCONNECT SUCTION HOSE SUB-ASSEMBLY


    1. A01HJ7J

      Remove the bolt and disconnect the suction hose sub-assembly.

    2. Remove the O-ring from the suction hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  11. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY


    1. A01HFAD

      Disconnect the 2 connectors.

    2. Detach the clamps and disconnect the wire harness.

    3. A01HFQ6

      Remove the 2 bolts and 2 nuts.

    4. Detach the clamp.

    5. A01OE4Q

      Using an E8 "TORX" socket wrench, remove the 2 stud bolts and compressor assembly with pulley.