AIR CONDITIONING SYSTEM, Diagnostic DTC:B1441

DTC Code DTC Name
B1441 Air Mix Damper Control Servo Motor Circuit (Passenger Side)

DESCRIPTION

The No. 1 air conditioning radiator damper servo sub-assembly (front passenger side air mix) sends pulse signals to indicate the damper position to the air conditioning amplifier assembly. The air conditioning amplifier assembly activates the motor (normal or reverse) based on these signals to move the No. 1 air conditioning radiator damper servo sub-assembly (front passenger side air mix) to the appropriate position. This adjusts the amount of air passing through the heater core after passing the evaporator and controls the temperature of the output air.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
B1441 Air Mix Damper Control Servo Motor Circuit (Passenger Side) Air mix damper position sensor value does not change even if air conditioning amplifier assembly operates No. 1 air conditioning radiator damper servo sub-assembly (front passenger side air mix)

  • No. 1 air conditioning radiator damper servo sub-assembly (front passenger side air mix)

  • Air conditioning harness assembly

  • Air conditioning amplifier assembly

 Memorized (30 seconds or more) -

Tech Tips

The air conditioning amplifier assembly stores the DTC of the respective malfunction if it has occurred for the period of time indicated in the brackets.

WIRING DIAGRAM

B00579XE11

CAUTION / NOTICE / HINT

Note


  • When DTC B1441, B1442, B1443 and B1446 are output at same time, there would be malfunctioning on No. 1 air conditioning radiator damper servo sub-assembly.

  • When the battery is disconnected, or servo motor or the air conditioning amplifier assembly is replaced, be sure to perform servo motor initialization.

    Click here

Tech Tips

Confirm that no mechanical problem is present because this diagnostic code can be output when either a damper link or the damper is mechanically locked.

PROCEDURE


  1. CHECK FOR DTC


    1. Clear the DTC.

      Click here


      Body Electrical > Air Conditioner > Clear DTCs

    2. Check for DTC.

      Click here


      Body Electrical > Air Conditioner > Trouble Codes
      Result
      Result Proceed to
      DTC B1441 is not output A
      DTC B1441 is output B
      DTC B1441 and B1497 are output C

    A

    USE SIMULATION METHOD TO CHECK Click here

    C

    GO TO DTC B1497 Click here

    B

  2. READ VALUE USING GTS


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Operate the front passenger side temperature adjustment switch.

    5. Enter the following menus: Body Electrical / Air Conditioner / Data List.

    6. Check the value(s) by referring to the table below.


      Body Electrical > Air Conditioner > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Air Mix Servo Targ Pulse(P) No. 1 air conditioning radiator damper servo sub-assembly (front passenger side air mix) target pulse

      Min.: 128

      Max.: 383

      for LHD:

      MAX. COLD: 255 (pulse)

      MAX. HOT: 347 (pulse)

      for RHD:

      MAX. COLD: 257 (pulse)

      MAX. HOT: 165 (pulse)

      		 -
      Air Mix Servo Actual Pulse(P) No. 1 air conditioning radiator damper servo sub-assembly (front passenger side air mix) actual pulse

      Min.: 128

      Max.: 383

      for LHD:

      MAX. COLD: 255 (pulse)

      MAX. HOT: 347 (pulse)

      for RHD:

      MAX. COLD: 257 (pulse)

      MAX. HOT: 165 (pulse)

      		 -

      Body Electrical > Air Conditioner > Data List
      Tester Display
      Air Mix Servo Targ Pulse(P)
      Air Mix Servo Actual Pulse(P)
      OK
      When the front passenger side temperature adjustment switch is turned from MAX COLD to MAX HOT, the actual pulse changes following the target pulse.
      Result
      Result Proceed to
      Target pulse and actual pulse do not change A
      Target pulse changes but actual pulse does not change B
      Actual pulse changes following the target pulse (When troubleshooting according to the DTC) C
      Actual pulse changes following the target pulse (When troubleshooting according to Problem Symptoms Table) D

    A

    REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY Click here

    C

    CHECK FOR DTC Click here

    D

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    B

  3. CHECK NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (FRONT PASSENGER SIDE AIR MIX)


    1. Replace the No. 1 air conditioning radiator damper servo sub-assembly (front passenger side air mix).

      Click here

      Tech Tips

      Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or known good one and check that the condition returns to normal.

    2. Clear the DTC.

      Click here


      Body Electrical > Air Conditioner > Clear DTCs

    3. Check for DTC.

      Click here


      Body Electrical > Air Conditioner > Trouble Codes
      Result
      Result Proceed to
      DTC B1441 is not output A
      DTC B1441 is output B

    A

    END (NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY [FRONT PASSENGER SIDE AIR MIX] IS DEFECTIVE)

    B

  4. CHECK AIR CONDITIONING HARNESS ASSEMBLY


    1. Replace the air conditioning harness assembly.

      Click here

      Tech Tips

      Since the air conditioning harness assembly cannot be inspected while it is removed from the vehicle, replace the air conditioning harness assembly with a new or known good one and check that the condition returns to normal.

    2. Clear the DTC.

      Click here


      Body Electrical > Air Conditioner > Clear DTCs

    3. Check for DTC.

      Click here


      Body Electrical > Air Conditioner > Trouble Codes
      Result
      Result Proceed to
      DTC B1441 is not output A
      DTC B1441 is output B

    A

    END (AIR CONDITIONING HARNESS ASSEMBLY IS DEFECTIVE)

    B

    REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY Click here

  5. CHECK FOR DTC


    1. Clear the DTC.

      Click here


      Body Electrical > Air Conditioner > Clear DTCs

    2. Check for DTC.

      Click here


      Body Electrical > Air Conditioner > Trouble Codes
      Result
      Result Proceed to
      DTC B1441 is not output A
      DTC B1441 is output B

    A

    USE SIMULATION METHOD TO CHECK Click here

    B

    REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY Click here