COMPRESSOR(for 3ZR-FAE) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE FAN AND GENERATOR V BELT

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  4. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY


    1. A01OEH5

      Remove the bolt and disconnect the discharge hose sub-assembly.

    2. Remove the O-ring from the discharge hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  5. DISCONNECT SUCTION HOSE SUB-ASSEMBLY


    1. A01OF16

      Remove the bolt and disconnect the suction hose sub-assembly.

    2. Remove the O-ring from the suction hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  6. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY


    1. A01OF0Q

      Disconnect the connector.

    2. Detach the clamp and disconnect the wire harness.

    3. A01OF8Y

      Remove the 2 bolts and 2 nuts.

    4. A01OE4Q

      Using an E8 "TORX" socket wrench, remove the 2 stud bolts and compressor assembly with pulley.