FRONT SEATBACK HEATER(for Manual Seat) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedures listed below are for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY LH

    Click here

  2. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

    Click here

  3. REMOVE VERTICAL ADJUSTING HANDLE LH

    Click here

  4. REMOVE FRONT SEAT CUSHION SHIELD LH

    Click here

  5. REMOVE FRONT INNER SEAT CUSHION SHIELD LH

    Click here

  6. REMOVE FRONT SEAT HEADREST SUPPORT

    Click here

  7. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. B00580X

      Disconnect the connector.

    2. Detach the clamp to disconnect the seat heater wire harness.

    3. B0057Q5

      Remove the 2 nuts to disconnect the 3 seatback cover brackets.

    4. Remove the separate type front seatback cover with pad.

  8. REMOVE SEPARATE TYPE FRONT SEATBACK COVER LH


    1. B005A61

      Pass the 3 seatback cover brackets through the 3 holes of the separate type front seatback pad.

    2. B005AU8

      Remove the 14 hog rings to remove the separate type front seatback cover LH from the separate type front seatback pad.