POWER SEAT SWITCH(for Front Seat) INSPECTION

PROCEDURE


  1. INSPECT FRONT POWER SEAT SWITCH LH (w/o Memory)

    A01HGGMC12
    *1 Slide Switch
    *2 Front Vertical Switch
    *3 Lifter Switch
    *4 Reclining Switch
    *a

    Component without harness connected

    (Front Power Seat Switch LH)

    1. for LHD, Driver Side:

      Measure the resistance according to the value(s) in the tables below.

      Standard Resistance (Slide Switch)
      Tester Connection Switch Condition Specified Condition

      5 (SLDF) - 8 (B)

      5 (SLDF) - 7 (B1)

      		 Front position Below 1 Ω

      2 (SLDR) - 11 (E)

      2 (SLDR) - 12 (E1)

      5 (SLDF) - 11 (E)

      5 (SLDF) - 12 (E1)

      		 Neutral Below 1 Ω

      2 (SLDR) - 11 (E)

      2 (SLDR) - 12 (E1)

      5 (SLDF) - 11 (E)

      5 (SLDF) - 12 (E1)

      		 Rear position Below 1 Ω

      2 (SLDR) - 8 (B)

      2 (SLDR) - 7 (B1)
      Standard Resistance (Front Vertical Switch)
      Tester Connection Switch Condition Specified Condition

      1 (FUP) - 8 (B)

      1 (FUP) - 7 (B1)

      		 Up position Below 1 Ω

      6 (FDWN) - 11 (E)

      6 (FDWN) - 12 (E1)

      1 (FUP) - 11 (E)

      1 (FUP) - 12 (E1)

      		 Neutral Below 1 Ω

      6 (FDWN) - 11 (E)

      6 (FDWN) - 12 (E1)

      1 (FUP) - 11 (E)

      1 (FUP) - 12 (E1)

      		 Down position Below 1 Ω

      6 (FDWN) - 8 (B)

      6 (FDWN) - 7 (B1)
      Standard Resistance (Lifter Switch)
      Tester Connection Switch Condition Specified Condition

      3 (LUP) - 8 (B)

      3 (LUP) - 7 (B1)

      		 Up position Below 1 Ω

      4 (LDWN) - 11 (E)

      4 (LDWN) - 12 (E1)

      3 (LUP) - 11 (E)

      3 (LUP) - 12 (E1)

      		 Neutral Below 1 Ω

      4 (LDWN) - 11 (E)

      4 (LDWN) - 12 (E1)

      3 (LUP) - 11 (E)

      3 (LUP) - 12 (E1)

      		 Down position Below 1 Ω

      4 (LDWN) - 8 (B)

      4 (LDWN) - 7 (B1)
      Standard Resistance (Reclining Switch)
      Tester Connection Switch Condition Specified Condition

      8 (B) - 10 (RCLF)

      7 (B1) - 10 (RCLF)

      		 Front position Below 1 Ω

      9 (RCLR) - 11 (E)

      9 (RCLR) - 12 (E1)

      10 (RCLF) - 11 (E)

      10 (RCLF) - 12 (E1)

      		 Neutral Below 1 Ω

      9 (RCLR) - 11 (E)

      9 (RCLR) - 12 (E1)

      10 (RCLF) - 11 (E)

      10 (RCLF) - 12 (E1)

      		 Rear position Below 1 Ω

      8 (B) - 9 (RCLR)

      7 (B1) - 9 (RCLR)

      If the result is not as specified, replace the front power seat switch LH.

    2. A01HGGMC13
      *1 Slide Switch
      *2 Front Vertical Switch
      *3 Lifter Switch
      *4 Reclining Switch
      *a

      Component without harness connected

      (Front Power Seat Switch LH)

      for RHD, Front Passenger Side:

      Measure the resistance according to the value(s) in the tables below.

      Standard Resistance (Slide Switch)
      Tester Connection Switch Condition Specified Condition
      5 (SLDF) - 8 (B) Front position Below 1 Ω
      2 (SLDR) - 11 (E)
      5 (SLDF) - 11 (E) Neutral Below 1 Ω
      2 (SLDR) - 11 (E)
      5 (SLDF) - 11 (E) Rear position Below 1 Ω
      2 (SLDR) - 8 (B)
      Standard Resistance (Front Vertical Switch)
      Tester Connection Switch Condition Specified Condition
      1 (FUP) - 8 (B) Up position Below 1 Ω
      6 (FDWN) - 11 (E)
      1 (FUP) - 11 (E) Neutral Below 1 Ω
      6 (FDWN) - 11 (E)
      1 (FUP) - 11 (E) Down position Below 1 Ω
      6 (FDWN) - 8 (B)
      Standard Resistance (Lifter Switch)
      Tester Connection Switch Condition Specified Condition
      3 (LUP) - 8 (B) Up position Below 1 Ω
      4 (LDWN) - 11 (E)
      3 (LUP) - 11 (E) Neutral Below 1 Ω
      4 (LDWN) - 11 (E)
      3 (LUP) - 11 (E) Down position Below 1 Ω
      4 (LDWN) - 8 (B)
      Standard Resistance (Reclining Switch)
      Tester Connection Switch Condition Specified Condition
      8 (B) - 10 (RCLF) Front position Below 1 Ω
      9 (RCLR) - 11 (E)
      10 (RCLF) - 11 (E) Neutral Below 1 Ω
      9 (RCLR) - 11 (E)
      10 (RCLF) - 11 (E) Rear position Below 1 Ω
      8 (B) - 9 (RCLR)

      If the result is not as specified, replace the front power seat switch LH.

  2. INSPECT FRONT POWER SEAT SWITCH RH (w/o Memory)


    1. A01HFXMC08
      *1 Slide Switch
      *2 Front Vertical Switch
      *3 Lifter Switch
      *4 Reclining Switch
      *a

      Component without harness connected

      (Front Power Seat Switch RH)

      for RHD, Driver Side:

      Measure the resistance according to the value(s) in the tables below.

      Standard Resistance (Slide Switch)
      Tester Connection Switch Condition Specified Condition

      2 (SLDF) - 13 (B)

      2 (SLDF) - 14 (B1)

      		 Front position Below 1 Ω

      5 (SLDR) - 10 (E)

      5 (SLDR) - 9 (E1)

      2 (SLDF) - 10 (E)

      2 (SLDF) - 9 (E1)

      		 Neutral Below 1 Ω

      5 (SLDR) - 10 (E)

      5 (SLDR) - 9 (E1)

      2 (SLDF) - 10 (E)

      2 (SLDF) - 9 (E1)

      		 Rear position Below 1 Ω

      5 (SLDR) - 13 (B)

      5 (SLDR) - 14 (B1)
      Standard Resistance (Front Vertical Switch)
      Tester Connection Switch Condition Specified Condition

      6 (FUP) - 13 (B)

      6 (FUP) - 14 (B1)

      		 Up position Below 1 Ω

      1 (FDWN) - 10 (E)

      1 (FDWN) - 9 (E1)

      6 (FUP) - 10 (E)

      6 (FUP) - 9 (E1)

      		 Neutral Below 1 Ω

      1 (FDWN) - 10 (E)

      1 (FDWN) - 9 (E1)

      6 (FUP) - 10 (E)

      6 (FUP) - 9 (E1)

      		 Down position Below 1 Ω

      1 (FDWN) - 13 (B)

      1 (FDWN) - 14 (B1)
      Standard Resistance (Lifter Switch)
      Tester Connection Switch Condition Specified Condition

      4 (LUP) - 13 (B)

      4 (LUP) - 14 (B1)

      		 Up position Below 1 Ω

      3 (LDWN) - 10 (E)

      3 (LDWN) - 9 (E1)

      4 (LUP) - 10 (E)

      4 (LUP) - 9 (E1)

      		 Neutral Below 1 Ω

      3 (LDWN) - 10 (E)

      3 (LDWN) - 9 (E1)

      4 (LUP) - 10 (E)

      4 (LUP) - 9 (E1)

      		 Down position Below 1 Ω

      3 (LDWN) - 13 (B)

      3 (LDWN) - 14 (B1)
      Standard Resistance (Reclining Switch)
      Tester Connection Switch Condition Specified Condition

      11 (RCLF) - 13 (B)

      11 (RCLF) - 14 (B1)

      		 Front position Below 1 Ω

      12 (RCLR) - 10 (E)

      12 (RCLR) - 9 (E1)

      11 (RCLF) - 10 (E)

      11 (RCLF) - 9 (E1)

      		 Neutral Below 1 Ω

      12 (RCLR) - 10 (E)

      12 (RCLR) - 9 (E1)

      11 (RCLF) - 10 (E)

      11 (RCLF) - 9 (E1)

      		 Rear position Below 1 Ω

      12 (RCLR) - 13 (B)

      12 (RCLR) - 14 (B1)

      If the result is not as specified, replace the front power seat switch RH.

    2. A01HFXMC09
      *1 Slide Switch
      *2 Front Vertical Switch
      *3 Lifter Switch
      *4 Reclining Switch
      *a

      Component without harness connected

      (Front Power Seat Switch RH)

      for LHD, Front Passenger Side:

      Measure the resistance according to the value(s) in the tables below.

      Standard Resistance (Slide Switch)
      Tester Connection Switch Condition Specified Condition
      2 (SLDF) - 13 (B) Front position Below 1 Ω
      5 (SLDR) - 10 (E)
      2 (SLDF) - 10 (E) Neutral Below 1 Ω
      5 (SLDR) - 10 (E)
      2 (SLDF) - 10 (E) Rear position Below 1 Ω
      5 (SLDR) - 13 (B)
      Standard Resistance (Front Vertical Switch)
      Tester Connection Switch Condition Specified Condition
      6 (FUP) - 13 (B) Up position Below 1 Ω
      1 (FDWN) - 10 (E)
      6 (FUP) - 10 (E) Neutral Below 1 Ω
      1 (FDWN) - 10 (E)
      6 (FUP) - 10 (E) Down position Below 1 Ω
      1 (FDWN) - 13 (B)
      Standard Resistance (Lifter Switch)
      Tester Connection Switch Condition Specified Condition
      4 (LUP) - 13 (B) Up position Below 1 Ω
      3 (LDWN) - 10 (E)
      4 (LUP) - 10 (E) Neutral Below 1 Ω
      3 (LDWN) - 10 (E)
      4 (LUP) - 10 (E) Down position Below 1 Ω
      3 (LDWN) - 13 (B)
      Standard Resistance (Reclining Switch)
      Tester Connection Switch Condition Specified Condition
      11 (RCLF) - 13 (B) Front position Below 1 Ω
      12 (RCLR) - 10 (E)
      11 (RCLF) - 10 (E) Neutral Below 1 Ω
      12 (RCLR) - 10 (E)
      11 (RCLF) - 10 (E) Rear position Below 1 Ω
      12 (RCLR) - 13 (B)

      If the result is not as specified, replace the front power seat switch RH.