REAR SEATBACK HEATER(for Manual Seat) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL SEPARATE TYPE REAR SEATBACK COVER LH (REAR SEATBACK HEATER ASSEMBLY LH) (for LH Side)

   Tech Tips

   
   

   • When installing the seat cover, refer to the precautions in order to prevent wrinkles from forming.

     Click here

   • Align the seam allowance in a single direction as shown in the illustration.

     
   
   
   1. 

      *1	Hog Ring Pliers

      Using hog ring pliers, install the separate type rear seatback cover LH (rear seatback heater assembly LH) to the separate type rear seatback pad LH with 12 new hog rings in the order indicated in the illustration.

      Note

      
      

      • Be careful not to damage the separate type rear seatback cover LH.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover LH.

2. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)

   Click here

3. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY (for LH Side)

   Click here

4. INSTALL REAR SEAT CUSHION MOULDING LH (for LH Side)

   Click here

5. INSTALL REAR SEAT CUSHION MOULDING LH (for LH Side)

   Click here

6. INSTALL NO. 1 SEATBACK COVER (for LH Side)

   Click here

7. INSTALL CENTER ARMREST HINGE COVER (for LH Side)

   Click here

8. INSTALL CENTER SEAT HINGE COVER (for LH Side)

   Click here

9. INSTALL NO. 1 SEAT ARMREST ASSEMBLY (for LH Side)

   Click here

10. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY (for LH Side)

    Click here

11. INSTALL REAR SEAT ARMREST HOLE COVER (for LH Side)

    Click here

12. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY LH (for LH Side)

    Click here

13. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY (for LH Side)

    Click here

14. INSTALL REAR SEAT HEADREST ASSEMBLY (for LH Side)

    Click here

15. INSTALL REAR SEAT INNER BELT ASSEMBLY LH (for LH Side)

    Click here

16. INSTALL SEPARATE TYPE REAR SEATBACK COVER RH (REAR SEATBACK HEATER ASSEMBLY RH) (for RH Side)

    Tech Tips

    
    

    • When installing the seat cover, refer to the precautions in order to prevent wrinkles from forming.

      Click here

    • Align the seam allowance in a single direction as shown in the illustration.

      
    
    
    1. 

       *1	Hog Ring Pliers

       Using hog ring pliers, install the separate type rear seatback cover RH (rear seatback heater assembly RH) to the separate type rear seatback pad RH with 12 new hog rings in the order indicated in the illustration.

       Note

       
       

       • Be careful not to damage the separate type rear seatback cover RH.

       • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover RH.

17. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)

    Click here

18. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY (for RH Side)

    Click here

19. INSTALL REAR SEAT CUSHION MOULDING RH (for RH Side)

    Click here

20. INSTALL REAR SEAT CUSHION MOULDING RH (for RH Side)

    Click here

21. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY RH (for RH Side)

    Click here

22. INSTALL REAR SEAT HEADREST ASSEMBLY (for RH Side)

    Click here

23. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH (for RH Side)

    Click here

24. INSTALL REAR SEATBACK COVER

    Click here

25. INSTALL REAR SEAT ASSEMBLY

    Click here

26. INSPECT SEAT HEATER SYSTEM (for Rear Seat)

    Click here