REAR SEATBACK HEATER(for Manual Seat) INSPECTION

PROCEDURE


  1. INSPECT SEPARATE TYPE REAR SEATBACK COVER RH (REAR SEATBACK HEATER ASSEMBLY RH) (for RH Side)


    1. B0059HSC02
      *a Connector A
      *b Connector B
      *c

      Component without harness connected

      (Separate Type Rear Seatback Cover RH (Rear Seatback Heater Assembly RH))

      Check the separate type rear seatback cover RH (rear seatback heater assembly RH).


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        A-1 - B-1 Always (23°C) Below 1 Ω
        A-2 - A-4 3.62 to 4.42 Ω
        A-2 - B-5
        A-3 - B-3 Below 1 Ω
        A-4 - B-5
        A-5 - B-2

        If the result is not as specified, replace the separate type rear seatback cover RH (rear seatback heater assembly RH).

  2. INSPECT SEPARATE TYPE REAR SEATBACK COVER LH (REAR SEATBACK HEATER ASSEMBLY LH) (for LH Side)


    1. B0059HSC02
      *a Connector A
      *b Connector B
      *c

      Component without harness connected

      (Separate Type Rear Seatback Cover LH (Rear Seatback Heater Assembly LH))

      Check the separate type rear seatback cover LH (rear seatback heater assembly LH).


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        A-1 - B-1 Always (23°C) Below 1 Ω
        A-2 - A-4 3.62 to 4.42 Ω
        A-2 - B-5
        A-3 - B-3 Below 1 Ω
        A-4 - B-5
        A-5 - B-2

        If the result is not as specified, replace the separate type rear seatback cover LH (rear seatback heater assembly LH).