DATA LIST
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Air Conditioner / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| FR Seat Heater Temperature | Front seat RH heater temperature | -29.7°C to 59.55°C |
|
Front seat heater (for Driver Side) is on |
| FL Seat Heater Temperature | Front seat LH heater temperature | -29.7°C to 59.55°C |
|
Front seat heater (for Front Passenger Side) is on |
| RR Seat Heater Temperature | Rear seat RH heater temperature | -29.7°C to 59.55°C |
|
Refreshing seat switch (for Rear seat RH) is on (w/ Rear Seat Heater) |
| RL Seat Heater Temperature | Rear seat LH heater temperature | -29.7°C to 59.55°C |
|
Refreshing seat switch (for Rear seat LH) is on (w/ Rear Seat Heater) |
| Number of Trouble Codes | Number of trouble codes | 0 to 255 | Number of DTCs will be displayed | - |