PRE-COLLISION SYSTEM WARNING BUZZER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

PROCEDURE


  1. INSTALL SKID CONTROL BUZZER ASSEMBLY


    1. Connect the connector.

    2. Install the skid control buzzer assembly (pre-collision system warning buzzer) with the clamp.

  2. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET

    Click here