PRE-COLLISION SYSTEM WARNING BUZZER INSPECTION

PROCEDURE


  1. INSPECT SKID CONTROL BUZZER ASSEMBLY (PRE-CRASH SAFETY SYSTEM WARNING BUZZER)


    1. B0058YKC02
      *a

      Component without harness connected

      (Skid Control Buzzer Assembly (Pre-collision System Warning Buzzer))

      Apply battery voltage and check the operation of the skid control buzzer assembly (pre-collision system warning buzzer) according to the table below.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 2(IG1)

      Battery negative (-) → Terminal 1(BZ)

      		 Skid control buzzer assembly (pre-collision system warning buzzer) sounds

      If the result is not as specified, replace the skid control buzzer assembly (pre-collision system warning buzzer).