PRE-CRASH SAFETY SYSTEM WARNING BUZZER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedures listed below are for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE RADIO RECEIVER ASSEMBLY

    Click here

  2. REMOVE SKID CONTROL BUZZER ASSEMBLY (PRE-CRASH SAFETY SYSTEM WARNING BUZZER)


    1. Using a clip remover, disconnect the clamp.

    2. B00582Q

      Disconnect the connector and remove the skid control buzzer assembly (pre-crash safety system warning buzzer).