AIRBAG SYSTEM CHECK MODE PROCEDURE

Note

Enter "Signal Check" from the "DTC Check" screen displayed on the GTS to clear the output DTCs (both present and past).

Tech Tips


  • DTCs can be stored more sensitively in check mode than in normal diagnosis mode.

  • Perform the check mode inspection when a malfunction in each squib circuit is suspected even after the normal system code is output through normal diagnosis mode inspection.


  1. CHECK MODE PROCEDURE (Using the GTS)


    1. Turn the engine switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the engine switch on (IG).

    4. Turn the GTS on.

    5. Select "Signal Check" and proceed with checking using the GTS.