HEADUP DISPLAY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL METER MIRROR SUB-ASSEMBLY (HEADUP DISPLAY)


    1. B005A37C06
      *a Screw
      *b Connector

      Install the combination meter mirror ECU (headup display) with the 4 screws.

    2. Connect the connector.

  2. INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY


    1. Install the No. 1 heater to register duct sub-assembly with the 3 screws.

  3. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  5. ENABLE AUTOAWAY/RETURN FUNCTION (for Power Tilt and Power Telescopic Steering Column)


    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter.

      Click here

  6. CHECK SRS WARNING LIGHT

    Click here