METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE METER / GAUGE SYSTEM


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Warning or Display.

      5. Select the setting by referring to the table below.

        Note

        Be sure to record the current value before customizing.


        Warning
        Tester Display Description Default Setting ECU
        Driver Side Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer ON 0:OFF,1:ON Combination meter assembly
        Front Passenger Side Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer ON 0:OFF,1:ON Combination meter assembly
        Rear Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer* ON 0:OFF,1:ON Combination meter assembly
        Flasher Sound Volume Adjustment Function to change the flasher sound volume Medium 10:Large,00:Medium,01:Small Combination meter assembly

        • *: w/ Rear Seat Belt Warning


        Display
        Tester Display Description Default Setting ECU
        ODO Display Time After IG OFF Setting Function to change the ODO display time after the engine switch is turned off 30s 00:30s,01:60s,10:600s,11:OFF Combination meter assembly

    2. Customizing with the combination meter assembly


      1. Turn the engine switch on (IG).

      2. Enter the following menus: Settings.

      3. Select the setting by referring to the table below.

        Note

        Be sure to record the current value before customizing.

        Settings
        Combination Meter Assembly Display Description Default Setting ECU
        Speed Warning*1 Function to change the speed limit buzzer on the display OFF ON or OFF Combination meter assembly
        Speed Warning Setting*1 Function to change the speed warning buzzer setting speed on the display 30 km/h or 20 mph 30 to 260 km/h or 20 to 160 mph Combination meter assembly
        Power Back Door Function*2 Function to change the power back door on the display ON ON or OFF Combination meter assembly
        Steering Assist*3 Function that turns the steering assist control on or off ON ON or OFF Combination meter assembly
        Sensitivity*3 Function to change the sensitivity on the display Standard Standard or High Combination meter assembly
        ECO driving indicator light (Symbol) Function to activate/deactivate the ECO driving indicator light ON ON or OFF Combination meter assembly
        Language Function to change the language on the display English English, Germany, French, Spanish, Italian, Russian, or Chinese Combination meter assembly
        Units Function to change the units on the display km (km/L) km (km/L), km (L/100 km), miles (MPG) Combination meter assembly
        Switch Settings Function to change the screen assigned to the TOP button on the steering pad switch assembly - - Combination meter assembly
        Drive Info 1 Function to change the item to be displayed on Drive Info 1

        • Current Fuel Economy (Bar Type)

        • Average Fuel Economy (After Reset)

        • Current Fuel Economy (Bar Type)

        • Average Fuel Economy (After Reset, After Start, After Refuel)

        • Average Speed (After Reset, After Start)

        • Elapsed Time (After Reset, After Start)

        • Distance (Range, After Start)

        • Other (Blank)

        		 Combination meter assembly
        Drive Info 2 Function to change the item to be displayed on Drive Info 2

        • Average Speed (After Reset)

        • Distance (Range)

        • Current Fuel Economy (Bar Type)

        • Average Fuel Economy (After Reset, After Start, After Refuel)

        • Average Speed (After Reset, After Start)

        • Elapsed Time (After Reset, After Start)

        • Distance (Range, After Start)

        • Other (Blank)

        		 Combination meter assembly
        Interrupt Display Function to change the interrupt display setting of each item ON ON or OFF Combination meter assembly
        Color Function to change the cursor color when selecting a displayed item Blue Blue or White Combination meter assembly
        TPMS*4 Press and hold the steering pad switch assembly to perform initialization. - - Combination meter assembly
        Initialization The setting items can be initialized - - Combination meter assembly

        *1: w/ Speed Warning

        *2: w/ Power Back Door System

        *3: w/ Lane Departure Alert System (w/ Steering Control)

        *4: w/ Tire Pressure Warning System