METER / GAUGE SYSTEM OPERATION CHECK

CHECK INDICATOR/WARNING LIGHT

1. Check the following indicators and warning lights.

   Indicator/Warning Light	Switch Condition	Specified Condition
   Brake warning light	Engine switch off → on (IG)	Comes on for 3 seconds
   Master warning light
   ABS warning light
   Slip indicator light
   VSC OFF indicator light
   PCS OFF warning light (w/ Pre-crash Safety System)
   Automatic high beam indicator light (w/ Automatic High Beam System)
   Brake hold standby indicator light
   Brake hold operated indicator light
   Tire pressure warning light (w/ Tire Pressure Warning System)
   Stop and start cancel indicator light (w/ Stop and Start System)
   Stop and start indicator light (w/ Stop and Start System)
   AWD indicator light (for AWD)	Engine switch off → on (IG)	Comes on for 4 seconds
   SRS warning light	Engine switch off → on (IG)	Comes on for 6 seconds
   EPS warning light	Engine switch off → on (IG)	Illuminates when engine switch turned on (IG) Turns off when engine started
   MIL

CHECK SPEEDOMETER

1. Connect the GTS to the DLC3.

2. Turn the engine switch on (IG).

3. Turn the GTS on.

4. Enter the following menus: Powertrain / ABS/VSC/TRC / Data List.

   
   Chassis > ABS/VSC/TRC > Data List

   Tester Display	Measurement Item	Normal Condition	Reference Value	Diagnostic Note
   Vehicle Speed	Vehicle speed	Min.: 0 km/h (0 mph), Max.: 326 km/h (202 mph)	Almost same as actual vehicle speed	-

   
   Chassis > ABS/VSC/TRC > Data List

   Tester Display
   Vehicle Speed

   for km/h (except Australia)

   Standard Indication (km/h)	Acceptable Range (km/h)
   20	21 to 25
   40	41.7 to 46.2
   60	62.7 to 67.2
   80	83.4 to 88.4
   100	104.3 to 109.3
   120	125.1 to 130.6
   140	145.8 to 151.8
   160	166.2 to 173.2
   180	186.9 to 194.5
   200	207.7 to 215.7
   220	228.4 to 236.8
   240	249.2 to 258

   for km/h (for Australia)

   Standard Indication (km/h)	Acceptable Range (km/h)
   20	20.2 to 24.2
   40	40.4 to 44.9
   60	60.6 to 65.1
   80	80.8 to 85.8
   100	101 to 105
   120	121.2 to 126.2
   140	141.4 to 146.4
   160	161.6 to 166.6
   180	181.8 to 186.8
   200	202 to 207
   220	222.2 to 27.2
   240	242.4 to 247.4

   for mph

   Standard Indication (mph)	Acceptable Range (mph)
   20	21 to 2.5
   40	42 to 44.5
   60	62.5 to 66
   80	83.1 to 87.1
   100	103.9 to 108.4
   120	124.7 to 129.6
   140	145.4 to 150.7

   If the result is not as specified, the speedometer may have a malfunction.

   Note

   Do not use worn, underinflated or overinflated tires as the speedometer reading will be inaccurate.

5. Check the deflection width of the speedometer indicator.

   CHECK TACHOMETER

   
   

   1. Connect a tune-up tachometer and start the engine.

   2. Compare the test results with the tachometer indicator.

   DC 13.5 V at 25°C (77°F)

   Standard Indication (rpm)	Acceptable Range Data in ( ) is for Reference (rpm)
   700	670 to 830
   1000	(900 to 1100)
   2000	(1850 to 2150)
   3000	2800 to 3200
   4000	(3800 to 4200)
   5000	4800 to 5200
   6000	(5750 to 6250)