RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT LIGHT CUT RELAY


    1. Remove the upper instrument panel sub-assembly.

      Click here

    2. B0058DE

      for LHD:

      Remove the light cut relay.

    3. B00595P

      for RHD:

      Remove the light cut relay.

    4. B00582ON01

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
        Battery voltage applied to terminals 1 and 2 Below 1 Ω

        If the result is not as specified, replace the light cut relay.

    5. Install the light cut relay.

    6. Install the upper instrument panel sub-assembly.

      Click here