GLOVE BOX LIGHT INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL GLOVE BOX LIGHT ASSEMBLY


    1. B0057XL

      Attach the 2 claws to install the glove box light assembly.

  2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. ENABLE AUTOAWAY/RETURN FUNCTION (for Power Tilt and Power Telescopic Steering Column)


    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter.

      Click here

  5. CHECK SRS WARNING LIGHT

    Click here