LIGHTING SYSTEM DATA LIST / ACTIVE TEST

DATA LIST

Note

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

Tech Tips

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Data List / All Data.

According to the display on the GTS, read the Data List.

Body Electrical > Main Body > Data List

Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
ACC SW	Engine switch on (ACC) signal	ON or OFF	ON: Engine switch on (ACC) OFF: Engine switch off	"ON" is also displayed for this item when the engine switch is on (IG).
IG SW	Engine switch on (IG) signal	ON or OFF	ON: Engine switch on (IG) OFF: Engine switch off	"OFF" is also displayed for this item when the engine switch is on (ACC).
RR Door Courtesy SW	Rear door courtesy light switch RH signal	ON or OFF	ON: Rear door RH open OFF: Rear door RH closed	-
RL Door Courtesy SW	Rear door courtesy light switch LH signal	ON or OFF	ON: Rear door LH open OFF: Rear door LH closed	-
Back Door Courtesy SW	Back door courtesy light switch signal	ON or OFF	ON: Back door open OFF: Back door closed	-
FR Door Lock Pos	Front door unlock detection switch RH signal	UNLOCK or LOCK	UNLOCK: Front door RH unlocked LOCK: Front door RH locked	-
FR Door Courtesy SW	Front door courtesy light switch RH signal	ON or OFF	ON: Front door RH open OFF: Front door RH closed	-
FL Door Lock Pos	Front door unlock detection switch LH signal	UNLOCK or LOCK	UNLOCK: Front door LH unlocked LOCK: Front door LH locked	-
FL Door Courtesy SW	Front door courtesy light switch LH signal	ON or OFF	ON: Front door LH open OFF: Front door LH closed	-
Dome Light DOOR SW	Door switch signal	ON or OFF	ON: Door switch on OFF: Door switch off	-
Dome Light SW	Front dome light switch signal	ON or OFF	ON: Front dome light switch on OFF: Front dome light switch off	-
RR-Door Lock Pos SW	Rear door RH unlock detection switch signal	ON or OFF	ON: Rear door RH unlocked OFF: Rear door RH locked	-
RL-Door Lock Pos SW	Rear door LH unlock detection switch signal	ON or OFF	ON: Rear door LH unlocked OFF: Rear door LH locked	-
Mirr-Foot-Lgt Approached/Exterior Light Approached	Function that turns on the door outside handle assembly (outside foot lights) when the vehicle is approached while carrying the key	ON or OFF	Customized setting displayed	-
Mirr-Foot-Lgt Unlocked/Exterior Light Unlocked	Function that turns on the door outside handle assembly (outside foot lights) when a door is unlocked with the electrical key transmitter or door lock switch of a door	ON or OFF	Customized setting displayed	-
Exterior Light (Door Open)	Function that turns on the door outside handle assembly (outside foot lights) when a door is opened	ON or OFF	Customized setting displayed	-
Mirror Foot Light Time/Exterior Light Time	Function that sets the illumination time for the door outside handle assembly (outside foot lights)	ON or OFF	Customized setting displayed	-
Interior Light Control	Function which controls the interior lights	ON or OFF	Customized setting displayed	-
I/L ON W/Door Key Unlock	Function which turns on the interior lights when door is unlocked	ON or OFF	Customized setting displayed	-
Lighting Time	Lighting time after closing all doors	7.5 s, 15 s or 30 s	Customized setting displayed	-
Room Light when Aprchd	Function which turns on the room lights when key is brought within vehicle exterior detection area	ON or OFF	Customized setting displayed	-
I/L when ACC OFF	Function which turns on the interior lights when the doors are unlocked	ON or OFF	Customized setting displayed	-

ACTIVE TEST

Tech Tips

Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / (desired system) / Active Test.

According to the display on the GTS, perform the Active Test.

Body Electrical > Main Body > Active Test

Tester Display	Measurement Item	Control Range	Diagnostic Note
Illuminated Entry System	Turns on the lights that are controlled by the illuminated entry system*	ON or OFF	Perform the Active Test with the door switch in the map light assembly turned on.
Exterior Light	Turns on the outside handle assembly (exterior foot light)	ON or OFF	-
Fr Foot Light	Turns on the front interior foot lights	ON or OFF	Check the operation with the vehicle stopped, all doors locked and the engine switch off.
Relay for Interior Light Auto Cut Function	DOME CUT relay	ON or OFF	Check the operation with the interior illumination on.
Dimmer Signal	Outputs night mode (dimmer signal)	ON or OFF	-

*: Refer to Description for the lights that are controlled by the illuminated entry system.

Click here

Body Electrical > Entry&Start > Active Test

Tester Display	Measurement Item	Control Range	Diagnostic Note
Power/Engine SW Light	Engine switch illumination	ON or OFF	Approximately 20 seconds after turning the engine switch off with all the doors closed, check the operation once the engine switch lettering illumination turns off.