FOOTWELL LIGHT(for RHD) REMOVAL

PROCEDURE


  1. REMOVE DOOR SCUFF PLATE ASSEMBLY RH (for Driver Side)

    Click here

  2. REMOVE COWL SIDE TRIM BOARD RH (for Driver Side)

    Click here

  3. DISCONNECT NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for Driver Side)


    1. B005AZN

      Remove the 2 screws.

    2. Detach the 3 claws and guide and disconnect the No. 1 instrument panel under cover sub-assembly.

  4. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH (for Driver Side)


    1. B0057POC01
      *1 Protective Tape

      Disconnect the connector.

    2. Using a screwdriver, detach the 2 claws and remove the No. 1 interior illumination light assembly RH.

      Tech Tips

      Tape the screwdriver tip before use.

  5. DISCONNECT NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for Front Passenger Side)


    1. B0058WX

      Using moulding remover A, detach the 2 claws and guide and disconnect the No. 2 instrument panel under cover sub-assembly.

  6. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH (for Front Passenger Side)


    1. B0058IIC01
      *1 Protective Tape

      Disconnect the connector.

    2. Using a screwdriver, detach the 2 claws and remove the No. 1 interior illumination light assembly LH.

      Tech Tips

      Tape the screwdriver tip before use.