INTRUSION SENSOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE MAP LIGHT ASSEMBLY

    Click here

  4. REMOVE THEFT WARNING ULTRASONIC SENSOR


    1. B0059RD

      Remove the 6 screws and disconnect the connector.

    2. Detach the 4 clamps and theft warning ultrasonic sensor.