ENGINE HOOD COURTESY SWITCH INSPECTION

PROCEDURE


  1. INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)


    1. B0058N3C02
      *a Open
      *b Lock
      *c

      Component without harness connected

      (Hood Lock Assembly (Engine Hood Courtesy Switch))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (E) - 2 (+) Opened 10 kΩ or higher
      Locked Below 1 Ω

      If the result is not as specified, replace the hood lock assembly (engine hood courtesy switch).