ELECTRICAL KEY OSCILLATOR(for Rear Floor) INSTALLATION

PROCEDURE


  1. INSTALL NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

    Note

    Do not reuse dropped or damaged parts.


    1. except China


      1. B005ATS

        Attach the clamp to install the No. 2 indoor electrical key antenna assembly.

    2. for China


      1. B005ANE

        Attach the clamp to install the No. 2 indoor electrical key antenna assembly.

  2. INSTALL NO. 2 CONSOLE BOX MOUNTING BRACKET


    1. except China


      1. B005956

        Temporarily install the No. 2 console box mounting bracket and connect the connector.

      2. B0058IW

        Temporarily install the 2 bolts and attach the clamp and clip.

      3. B0057WK

        Temporarily install the 2 bolts and attach the 4 claws.

      4. Attach the 2 clamps and clip.

      5. B0057G5

        Connect the connector and tighten the 4 bolts.

        Torque:
        8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

    2. for China


      1. B0059JH

        Temporarily install the No. 2 console box mounting bracket and connect the connector.

      2. B0058H2

        Temporarily install the 2 bolts and attach the clamp and clip.

      3. B0058QI

        Temporarily install the 2 bolts and attach the 4 claws.

      4. Attach the 2 clamps and clip.

      5. B0057G5

        Connect the connector and tighten the 4 bolts.

        Torque:
        8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

  3. INSTALL CONSOLE BOX ASSEMBLY

    Click here