THEFT DETERRENT SYSTEM CUSTOMIZE PARAMETERS


  1. INSTALL CUSTOMIZE THEFT DETERRENT SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the GTS.


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Security or Wireless Door Lock.

      5. Select the setting by referring to the table below.


        Security
        Tester Display Description Default Setting ECU
        Intrusion Win Opened This function is used to enable or disable the window open warning*1. OFF 00:OFF,01:ON Main Body ECU (Multiplex Network Body ECU)
        Security control with mechanism key This function makes it possible to cancel the security alarm with the mechanical key*2. OFF 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)
        Window Open Warning This function is used to enable or disable the window open warning. ON 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)
        Slide Roof Open Warning This function is used to enable or disable the sliding roof open warning*3. ON 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)
        Intrusion Sensor Sound Detection Function Set to detect an intrusion using the sound detection function.*1*4 ON 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)
        Intrusion Sensor Sensitivity Level This function adjusts sensitivity of the sensor that detects intrusions.*1*4 Normal 0:Low,1:Normal Main Body ECU (Multiplex Network Body ECU)

        • *1: w/ Intrusion Sensor Cancel Switch

        • *2: Vehicles displaying the Item "Security control with mechanism key" on the GTS

        • *3: w/ Sliding Roof System

        • *4: w/o Door Ajar Warning Buzzer Function


        Wireless Door Lock
        Tester Display Description Default Setting ECU
        Panic Function This function operates the theft deterrent system by continuously pressing the panic switch on the electrical key transmitter sub-assembly for 0.8 seconds* ON 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)

        • *: w/ Panic Switch