BATTERY CURRENT SENSOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. REMOVE BATTERY STATE SENSOR ASSEMBLY


    1. B0059R7

      Remove the nut and disconnect the wire harness from the battery state sensor assembly.

      Note

      When disconnect the cable, some systems need to be initialized after the cable is reconnected.

      Click here

    2. B005AS9

      Loosen the nut and remove the battery state sensor assembly from the battery.

    3. B0057S9

      Disconnect the connector from the battery state sensor assembly.