GENERATOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE V-RIBBED BELT

    Click here

  4. REMOVE GENERATOR ASSEMBLY


    1. B00586W

      Remove the terminal cap.

    2. Remove the nut and disconnect the wire harness from the terminal B.

    3. Disconnect the generator connector and detach the wire harness clamp.

    4. B00581C

      Remove the 2 bolts and generator assembly.

    5. B0057I9

      Remove the bolt and wire harness clamp bracket from the generator assembly.