PANORAMIC VIEW MONITOR SYSTEM, Diagnostic DTC:C2A6A

DTC Code	DTC Name
C2A6A	Back Camera Response Malfunction

DESCRIPTION

During self diagnosis of the parking assist ECU, the parking assist ECU sends display mode ID signals to the rear television camera assembly. This DTC is stored when the output of the rear television camera assembly does not match the expected output.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
C2A6A	Back Camera Response Malfunction	Abnormal response from the rear television camera assembly	Rear television camera assembly Parking assist ECU

CAUTION / NOTICE / HINT

Note

When "!" mark is displayed on the multi-display assembly after the cable is disconnected from the negative (-) battery terminal, correct the steering angle neutral point.

Click here
Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.

Click here

PROCEDURE

CHECK FOR DTC

Clear the DTCs.

Click here

Chassis > Panoramic View Monitor > Clear DTCs

Check for DTCs.

Click here

Chassis > Panoramic View Monitor > Trouble Codes

OK
DTC C2A6A is not output.

Result

Proceed to
OK
NG

USE SIMULATION METHOD TO CHECK Click here

REPLACE REAR TELEVISION CAMERA ASSEMBLY

Replace the rear television camera assembly with a new or normally functioning one.

Click here

Result

Proceed to
NEXT

CHECK FOR DTC

Clear the DTCs.

Click here

Chassis > Panoramic View Monitor > Clear DTCs

Check for DTCs.

Click here

Chassis > Panoramic View Monitor > Trouble Codes

OK
DTC C2A6A is not output.

Result

Proceed to
OK
NG

END (REAR TELEVISION CAMERA ASSEMBLY IS DEFECTIVE)

REPLACE PARKING ASSIST ECU Click here