PANORAMIC VIEW MONITOR SYSTEM, Diagnostic DTC:U0073, U0100, U0126, U0129, U0140, U0163, U0233, U0265, U0266, U0267, U0268, U1110

DTC Code DTC Name
U0073 Control Module Communication Bus Off
U0100 Lost Communication with ECM / PCM "A"
U0126 Lost Communication with Steering Angle Sensor Module
U0129 Lost Communication with Brake System Control Module
U0140 Lost Communication with Main Body ECU
U0163 Lost Communication with Navigation Control Module
U0233 Lost Communication with Blind Spot Monitor Master Module
U0265 Lost Communication with Image Processing Sensor A
U0266 Lost Communication with Image Processing Sensor B
U0267 Lost Communication with Image Processing Sensor C
U0268 Lost Communication with Image Processing Sensor D
U1110 Lost Communication with Clearance Warning ECU

DESCRIPTION

These DTCs are stored if there is a malfunction in the CAN communication system connected to the parking assist ECU.

Tech Tips

If CAN communication system DTCs are stored, they may also be stored in other systems.

DTC No. Detection Item DTC Detection Condition Trouble Area
U0073 Control Module Communication Bus Off Control module communication bus off CAN communication system
U0100 Lost Communication with ECM / PCM "A" Lost communication with ECM CAN communication system
U0126 Lost Communication with Steering Angle Sensor Module Lost communication with spiral with sensor cable sub-assembly CAN communication system
U0129 Lost Communication with Brake System Control Module Lost communication with brake actuator assembly (skid control ECU) CAN communication system
U0140 Lost Communication with Main Body ECU Lost communication with main body ECU (multiplex network body ECU) CAN communication system
U0163 Lost Communication with Navigation Control Module Lost Communication With Radio receiver assembly CAN communication system
U0233 Lost Communication with Blind Spot Monitor Master Module Lost Communication with Blind spot monitor sensor LH CAN communication system
U0265 Lost Communication with Image Processing Sensor A Lost Communication with rear television camera assembly CAN communication system
U0266 Lost Communication with Image Processing Sensor B Lost Communication with side television camera assembly LH CAN communication system
U0267 Lost Communication with Image Processing Sensor C Lost Communication with front television camera assembly CAN communication system
U0268 Lost Communication with Image Processing Sensor D Lost Communication with side television camera assembly RH CAN communication system
U1110 Lost Communication with Clearance Warning ECU Lost communication with clearance warning ECU assembly CAN communication system

PROCEDURE


  1. CHECK FOR DTC


    1. Clear the DTCs.

      Click here


      Chassis > Panoramic View Monitor > Clear DTCs

    2. Check for DTCs.

      Click here


      Chassis > Panoramic View Monitor > Trouble Codes
      Result
      Result Proceed to
      DTC U0073, U0100, U0126, U0129, U0140, U0163, U0233, U0265, U0266, U0267, U0268 and U1110 are not output A
      DTC U0073, U0100, U0126, U0129, U0140, U0163, U0233, U0265, U0266, U0267, U0268 and/or U1110 are output B

      Tech Tips


      • If CAN communication system DTCs are stored, they may also be stored in other systems.

      • If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.

      • If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again, even though the DTC was not output when rechecking for DTCs.

        Click here


    A

    USE SIMULATION METHOD TO CHECK Click here

    B

    GO TO CAN COMMUNICATION SYSTEM Click here