ULTRASONIC SENSOR(for Front) REMOVAL

PROCEDURE


  1. PRECAUTION

    Click here

  2. REMOVE FRONT BUMPER COVER


    1. for Sport Package:

      Click here

    2. except Sport Package:

      Click here

  3. REMOVE NO. 3 ENGINE ROOM WIRE


    1. for Sport Package:

      Click here

    2. except Sport Package:

      Click here

  4. REMOVE NO. 1 ULTRASONIC SENSOR


    1. A01HF8D

      Detach the 2 claws and remove the No. 1 ultrasonic sensor.

      Tech Tips

      Use the same procedure for both No. 1 ultrasonic sensors.

  5. REMOVE NO. 2 ULTRASONIC SENSOR


    1. A01HF8D

      Detach the 2 claws and remove the No. 2 ultrasonic sensor.

      Tech Tips


      • The illustration shows the No. 2 ultrasonic sensor for the LH corner. The horizontal orientation of the No. 2 ultrasonic sensor for the RH corner is opposite that of the image shown in the illustration.

      • Use the same procedure for both No. 2 ultrasonic sensors.

  6. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (except Sport Package)


    1. Remove the No. 1 ultrasonic sensor retainer from the front bumper cover.

    2. A01HJNO

      Remove the old double-sided tape from the front bumper cover.

      Tech Tips

      Use the same procedure for both No. 1 ultrasonic sensor retainers.

  7. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER


    1. A01HJNO

      Remove the No. 2 ultrasonic sensor retainer from the front bumper cover.

      Tech Tips


      • The illustration shows the No. 2 ultrasonic sensor retainer for the LH corner. The horizontal orientation of the No. 2 ultrasonic sensor retainer for the RH corner is opposite that of the image shown in the illustration.

      • Use the same procedure for both No. 2 ultrasonic sensor retainers.

    2. Remove the old double-sided tape from the front bumper cover.