BLIND SPOT MONITOR SYSTEM, Diagnostic DTC:C1AB6

DTC Code DTC Name
C1AB6 Blind Spot Monitor Master Module

DESCRIPTION

This DTC is stored when the blind spot monitor sensor LH detects an internal malfunction.

DTC No. Detection Item DTC Detection Condition Trouble Area Note
C1AB6 Blind Spot Monitor Master Module The blind spot monitor sensor LH (master) detects an internal malfunction. Blind spot monitor sensor LH -

CAUTION / NOTICE / HINT

Note

When checking for DTCs, make sure that the blind spot monitor main switch (combination switch assembly) is on.

PROCEDURE


  1. CHECK DTC


    1. Clear the DTCs.

      Click here


      Body Electrical > Blind Spot Monitor Master > Clear DTCs
    2. Recheck for DTCs and check if the same DTC is output again.


      Body Electrical > Blind Spot Monitor Master > Trouble Codes
      OK
      DTC C1AB6 is not output.
      Result
      Proceed to
      OK
      NG

    OK
    NG