PARKING ASSIST MONITOR SYSTEM, Diagnostic DTC:C1694

DTC Code DTC Name
C1694 Steering Angle Initialization Incomplete

DESCRIPTION


DTC No. Detection Item DTC Detection Condition Trouble Area
C1694 Steering Angle Initialization Incomplete Maximum steering angle has not been memorized (steering angle setting is incomplete)

  • Steering angle setting

  • Rear television camera assembly

CAUTION / NOTICE / HINT

Note


  • When "!" mark is displayed on the multi-display assembly after disconnecting the cable from the negative (-) battery terminal, correct the steering angle neutral point.

    Click here

  • Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed.

    Click here

PROCEDURE


  1. ADJUST SETTINGS (STEERING ANGLE SETTING)


    1. Perform steering angle setting.


      1. Steering angle setting.

        Click here

      Result
      Proceed to
      NEXT

    NEXT

  2. CHECK FOR DTC


    1. Clear the DTCs.

      Click here


      Chassis > Parking Assist Camera > Clear DTCs

    2. Check for DTCs.

      Click here


      Chassis > Parking Assist Camera > Trouble Codes

      Tech Tips


      • If DTC C1694 is output, perform the steering angle setting again.

      • If DTC C1694 is still output after performing the steering angle setting 3 times, replace the rear television camera assembly.

      Result
      Result Proceed to
      DTC C1694 is not output A
      DTC C1694 is output B

    A

    END

    B

    REPLACE REAR TELEVISION CAMERA ASSEMBLY Click here