LEXUS PARKING ASSIST-SENSOR SYSTEM(w/ Intelligent Clearance Sonar System) CALIBRATION

Note

When any of the following parts have been replaced, perform adjustment shown in the following table. If not, the LEXUS parking assist-sensor system may not operate correctly.


  1. ADJUST LEXUS PARKING ASSIST-SENSOR SYSTEM


    1. The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during LEXUS parking assist-sensor system removal/installation are shown below.

      Part Name Operation Adjustment Item Proceed to
      Clearance warning ECU assembly Replacement Registration of bumper type

      Click here

      Steering angle neutral point
      Bumper type registration
      Ultrasonic sensor detection angle registration
      Ultrasonic sensor

      • Removal and installation

      • Replacement

      		 Ultrasonic sensor detection angle
      Ultrasonic sensor detection angle registration
      An ultrasonic sensor becomes misaligned Ultrasonic sensor detection angle
      Ultrasonic sensor detection angle registration
      An ultrasonic sensor is subjected to impact Ultrasonic sensor detection angle
      Ultrasonic sensor detection angle registration