MULTI-DISPLAY REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE INSTRUMENT PANEL FINISH PLATE

    Click here

  4. REMOVE MULTI-DISPLAY ASSEMBLY WITH BRACKET


    1. B005BGZ

      for 8 inch:


      1. Remove the 2 bolts.

      2. B00572S

        Move the multi-display assembly with bracket as indicated by the arrow shown in the illustration to detach the 2 clips.

      3. B0059X0

        Detach the 3 guides.

      4. B0057G0

        Disconnect the 3 connector.

      5. Detach the clamp and remove the multi-display assembly with bracket.

    2. B00587O

      for 10.3 inch:


      1. Remove the 2 bolts.

      2. B00593F

        Move the multi-display assembly with bracket as indicated by the arrow shown in the illustration to detach the 2 clips.

      3. B00576O

        Detach the 3 guides.

      4. B0057SU

        Disconnect the 3 connector.

      5. Detach the clamp and remove the multi-display assembly with bracket.

  5. REMOVE MULTI-DISPLAY CONTROLLER BRACKET A


    1. for 8 inch:


      1. B0057OY

        Remove the 2 screws.

      2. B0059EM

        Remove the 2 screws and multi-display controller bracket A.

    2. for 10.3 inch:


      1. B005BC6

        Remove the 2 screws.

      2. B005AS4

        Remove the 2 screws and multi-display controller bracket A.

  6. REMOVE MULTI-DISPLAY ASSEMBLY