HARD DISK DRIVE REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE RADIO RECEIVER ASSEMBLY

    Click here

  4. REMOVE NO. 1 RADIO BRACKET

    Click here

  5. REMOVE HARD DISC


    1. B005A11

      Remove the 3 screws.

    2. B0058UY

      Remove the cover in the direction of the arrow shown in the illustration.

    3. B005862

      Remove the hard disc in the direction of the arrow shown in the illustration.