RADIO ANTENNA CORD REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  4. REMOVE NO. 1 ANTENNA CORD SUB-ASSEMBLY


    1. for LHD:


      1. Disconnect the connector.

        B0057GTC03
        *A for Type A *B for Type B
        *a Guide - -

      2. Remove the bolt.

      3. Detach the 6 clamps, guide and remove the No. 1 antenna cord sub-assembly.

    2. for RHD:


      1. Disconnect the connector.

        B0058DOC01
        *A for Type A *B for Type A
        *a Guide - -

      2. Remove the bolt.

      3. Detach the 8 clamps, guide and remove the No. 1 antenna cord sub-assembly.

  5. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

  6. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY


    1. Normal roof


      1. Remove the tape enough that the No. 2 antenna cord sub-assembly can be removed, and then remove the No. 2 antenna cord sub-assembly from the double-sided tape on the roof headlining.

        B0058DQC01
        *A w/ Digital Audio Broadcasting, w/ Television Antenna *B w/o Digital Audio Broadcasting, w/o Television Antenna
        B0057KY Tape - -

    2. Sliding roof


      1. Remove the tape enough that the No. 2 antenna cord sub-assembly can be removed, and then remove the No. 2 antenna cord sub-assembly from the double-sided tape on the roof headlining

        B0058HZC01
        *A w/ Digital Audio Broadcasting, w/ Television Antenna *B w/o Digital Audio Broadcasting, w/o Television Antenna
        B0057KY Tape - -

    3. Panoramic moon roof


      1. Remove the tape enough that the No. 2 antenna cord sub-assembly can be removed, and then remove the No. 2 antenna cord sub-assembly from the double-sided tape on the roof headlining.

        B0059G6C01
        *A w/ Digital Audio Broadcasting, w/ Television Antenna *B w/o Digital Audio Broadcasting, w/o Television Antenna
        B0057KY Tape - -

  7. REMOVE NO. 4 ANTENNA CORD SUB-ASSEMBLY


    1. Disconnect each connector.

      B0059WUC01
      *A w/ Telematics *B w/o Telematics

    2. Detach the 2 clamps to washer hose and remove the bolt.

    3. Detach the 2 clamps, guide and remove the No. 4 antenna cord-assembly